Specifications
Size & fit
- Diameter
- 125 mm (5")
- Bore sizes
- 20 / 22.23 mm
Teeth & segments
- Style
- Continuous rim
- Segment / rim width
- 2 mm
- Segment / rim height
- 5 mm
- Construction
- Cold pressed
Use
- Cuts
- Tile, Concrete, Masonry, Stone
- Blade type
- Diamond
- Cutting mode
- Wet
- Max speed
- 12,200 rpm
Description
Overview
A wet-cutting continuous rim diamond blade for angle grinders and hand-held tile saws. The unbroken rim gives the cleanest, chip-free edge in ceramic and porcelain tile, marble and granite.
Applications
- Ceramic and porcelain tile
- Marble, granite and natural stone tile
- Brick and pavers where a clean edge matters
- Wet cutting on tile saws and grinders with water feed
Features
- Continuous diamond rim for smooth, chip-free cuts in brittle materials.
- Designed for wet cutting: water cools the rim and flushes the slurry for longer life.
- Reducer rings let one blade fit tools with any of the listed bore sizes.
Fitting & safety
- Match the rotation arrow on the blade to the direction marked on your saw's guard.
- Fit the reducer ring that matches your saw's arbor so the blade sits centred, then tighten the flange firmly.
- Make sure your saw's no-load speed is no higher than the blade's maximum speed (see specifications).
- Use only with a constant water supply. Running this blade dry will overheat and damage the rim.
- Cutting masonry, concrete and stone releases crystalline silica dust. Use water suppression or on-tool dust extraction and wear a P2 (or better) respirator.
- Inspect the blade before every use and replace it if the plate is cracked or bent, or if teeth or segments are damaged.