Specifications
Size & fit
- Diameter
- 150 mm
- Bore sizes
- 22.23 mm
Teeth & segments
- Segments
- 24
- Style
- Double row cup
- Segment / rim width
- 5 mm
Use
- Cuts
- Concrete, Stone, Masonry, Asphalt, Ceramic
- Blade type
- Diamond
- Cutting mode
- Dry & wet
Description
Overview
A double-row diamond cup grinding wheel for angle grinders and polishing machines. It grinds concrete, stone, brick, asphalt and ceramic quickly, wet or dry.
Applications
- Levelling and smoothing concrete
- Removing high spots, coatings and adhesive residue
- Shaping and grinding stone and brick
- Grinding asphalt and ceramic surfaces
Features
- Double row of diamond segments for fast stock removal and a long life.
- Sandblasted segment edges for smooth chip removal and sharp cutting.
- Low-vibration design reduces operator fatigue compared with conventional abrasives.
- Suitable for both wet and dry grinding.
Fitting & safety
- Fit only to a grinder with its guard in place, and make sure the grinder's rated speed suits the wheel size.
- Check the wheel's bore matches your grinder's spindle before fitting (see specifications).
- Cutting masonry, concrete and stone releases crystalline silica dust. Use water suppression or on-tool dust extraction and wear a P2 (or better) respirator.
- Wear safety glasses or a face shield, hearing protection and gloves.
- Inspect the wheel before use and replace it if segments are cracked or missing.