Specifications
Size & fit
- Diameter
- 160 mm (6-1/4")
- Bore sizes
- 16 / 20 mm
- Kerf
- 1.6 mm
- Plate thickness
- 1.2 mm
Teeth & segments
- Tooth count
- 20T
- Style
- ATB
- Tooth hardness
- 90°
Use
- Cuts
- Wood
- Blade type
- TCT (carbide tipped)
- Max speed
- 9,600 rpm
Description
Overview
A fast-cutting TCT circular saw blade for cordless circular saws and plunge / track saws. Its low tooth count clears chips quickly, so it is the blade for fast rip cuts and rough carpentry where speed matters more than a polished edge.
Applications
- Fast rip cuts along the grain
- Framing, decking and fencing timber
- Rough cuts where speed matters more than finish
- Best results in pine and other medium-soft timbers
- Not recommended for chipboard (particleboard), MDF and other fibre boards, veneered board or hardboard
Features
- Tungsten carbide tipped teeth hold their edge far longer than plain steel blades.
- Alternate top bevel teeth shear the wood fibres for a neat edge with minimal tear-out.
- Thin kerf removes less timber, so the saw works less hard. Well suited to cordless saws.
- Reducer rings let one blade fit saws with any of the listed bore sizes.
- Sold as a single blade or in value multi-packs.
Fitting & safety
- Match the rotation arrow on the blade to the direction marked on your saw's guard.
- Fit the reducer ring that matches your saw's arbor so the blade sits centred, then tighten the flange firmly.
- Make sure your saw's no-load speed is no higher than the blade's maximum speed (see specifications).
- Remove nails, screws and staples before cutting. Carbide tips chip on hidden metal.
- Wear safety glasses and hearing protection, keep the guard in place and let the blade reach full speed before it touches the work.