Specifications
Size & fit
- Diameter
- 180 mm (7")
- Bore sizes
- 22.23 / 25.4 mm
Teeth & segments
- Style
- Segmented
- Segment / rim width
- 2.4 mm
- Segment / rim height
- 7 mm
- Construction
- Cold pressed
Use
- Cuts
- Tile, Concrete, Masonry, Stone
- Blade type
- Diamond
- Cutting mode
- Dry
- Max speed
- 8,600 rpm
Description
Overview
A dry-cutting segmented diamond blade for large angle grinders. The gaps between the segments clear debris and let air cool the blade, giving fast, aggressive cuts in brick, pavers, block and concrete.
Applications
- Brick, besser block and pavers
- Concrete slabs, kerbs and steps
- Natural stone and granite
- General masonry and landscaping work
Features
- Diamond segments expose fresh diamond as they wear, so the blade keeps cutting through its life.
- Open gullets between segments carry away slurry and dust and help the blade run cool when cutting dry.
- Reducer rings let one blade fit tools with any of the listed bore sizes.
Fitting & safety
- Match the rotation arrow on the blade to the direction marked on your saw's guard.
- Fit the reducer ring that matches your saw's arbor so the blade sits centred, then tighten the flange firmly.
- Make sure your saw's no-load speed is no higher than the blade's maximum speed (see specifications).
- Cut dry in short passes and let the blade spin free between cuts to cool down.
- Cutting masonry, concrete and stone releases crystalline silica dust. Use water suppression or on-tool dust extraction and wear a P2 (or better) respirator.
- Inspect the blade before every use and replace it if the plate is cracked or bent, or if teeth or segments are damaged.