Specifications
Size & fit
- Diameter
- 216 mm (8-1/2")
- Bore sizes
- 22.23 / 25.4 / 30 mm
- Kerf
- 2.5 mm
- Plate thickness
- 1.6 mm
Teeth & segments
- Tooth count
- 30T
- Style
- ATB
- Tooth hardness
- 90°
Use
- Cuts
- Wood
- Blade type
- TCT (carbide tipped)
- Max speed
- 7,000 rpm
Description
Overview
A general-purpose TCT circular saw blade for compact mitre saws and hand-held circular saws. A balanced tooth count gives a good mix of speed and finish for everyday ripping and crosscutting.
Applications
- Everyday ripping and crosscutting
- Structural pine and dressed timber
- Best results in pine and other medium-soft timbers
- Not recommended for chipboard (particleboard), MDF and other fibre boards, veneered board or hardboard
Features
- Tungsten carbide tipped teeth hold their edge far longer than plain steel blades.
- Alternate top bevel teeth shear the wood fibres for a neat edge with minimal tear-out.
- Reducer rings let one blade fit saws with any of the listed bore sizes.
- Sold as a single blade or in value multi-packs.
Fitting & safety
- Match the rotation arrow on the blade to the direction marked on your saw's guard.
- Fit the reducer ring that matches your saw's arbor so the blade sits centred, then tighten the flange firmly.
- Make sure your saw's no-load speed is no higher than the blade's maximum speed (see specifications).
- Remove nails, screws and staples before cutting. Carbide tips chip on hidden metal.
- Wear safety glasses and hearing protection, keep the guard in place and let the blade reach full speed before it touches the work.