Specifications
Size & fit
- Diameter
- 254 mm (10")
- Bore sizes
- 22.23 / 25.4 / 30 mm
- Kerf
- 2.8 mm
- Plate thickness
- 1.8 mm
Teeth & segments
- Tooth count
- 60T
- Style
- ATB
- Tooth hardness
- 90°
Use
- Cuts
- Wood
- Blade type
- TCT (carbide tipped)
- Max speed
- 6,000 rpm
Description
Overview
A fine-finish TCT circular saw blade for mitre saws, sliding compound saws and table saws. A high tooth count leaves a clean, splinter-free edge for crosscuts, trim work and sheet goods.
Applications
- Clean crosscuts and mitres
- Skirting, architraves and other trim
- Plywood and laminated sheet
- Best results in laminated sandwich panels, pine and other medium-soft timbers
- Not recommended for chipboard (particleboard), MDF and other fibre boards, veneered board or hardboard
Features
- Tungsten carbide tipped teeth hold their edge far longer than plain steel blades.
- Alternate top bevel teeth shear the wood fibres for a neat edge with minimal tear-out.
- Reducer rings let one blade fit saws with any of the listed bore sizes.
- Sold as a single blade or in value multi-packs.
Fitting & safety
- Match the rotation arrow on the blade to the direction marked on your saw's guard.
- Fit the reducer ring that matches your saw's arbor so the blade sits centred, then tighten the flange firmly.
- Make sure your saw's no-load speed is no higher than the blade's maximum speed (see specifications).
- Remove nails, screws and staples before cutting. Carbide tips chip on hidden metal.
- Wear safety glasses and hearing protection, keep the guard in place and let the blade reach full speed before it touches the work.